(as of Dec 01,2021 11:55:34 UTC – Details)
How the automatic waterer can help?
No worry of forgetting water your plants anymore. Reliable plants carer when you are outside, travelling or busy with work. Water your plants on time as schedule set, with specific watering time, watering frequency. Easy set- up step and programming.
How the watering unit helps for caring your plants?
√ Automatic watering and easy customization on watering cycle
√ Digital panel and simple three button for easy setting
√ Included all-in-one accessories, easy 4 steps set up
√ Two Types of Power; Supports AA battery/direct USB charge
√ Saving 70% less water than traditional spray
√ Time cycle settings are stored in internal memory automatically
√ Your Plants are never be neglected !
How to set up ?
Step 1: Install inlet pipe and outlet pipe
Install inlet pipe with its filter to the pump; then install the outlet pipe with dripper to the pump. (Please install inlet and outlet tube to its port correspondingly) The tube/pipe can be cut into wanted length and installed with different connectors as your plants need.
Step 2: Set up power
Support two types of power- 4pcs of AA battery or direct USB cable charge. When the battery and USB power supply exist at the same time, the system will give priority to USB charger power.
Step 3: Set up water time
Left side panel for setting watering time, and the right side for interval time. Press the button below panel to control the time setting. Watering time includes 2 types of unit (second 10-90s/minutes 2-5mins) Interval time includes 2 types of unit (1-30 days interger number/0.1-2.3 hour decimal number. 0.1h=1hr, 0.2=2hr….etc ). Keep hold on the button for 3 seconds can switch unit type.
Step 4: Prepare water bucket and insert dripper into dirt
When all 3 previous steps is done, prepare a bucket of water and insert drippers into dirt. Drippers should be thrust into the tube deeply incase water leak out.
(water bucket need to be placed lower than pump in case siphonage effect which is dirt track back into clean water)
Signal of LED light
Working : green light twinkle quickly.
Sleep mode: green light twinkle slowly for each 5 second.
Low battery: red light twinkle.
Digital number flicking and counting down: pump is watering.
Press any button can wake and light up the pump even when it’s on working or sleep mode without influencing the set watering schedule.
Reliable, Reassurance & free from worry
Intelligent & smart indoor plant irrigation system make you rest assured of caring your plants on time. Easily design your own “garden map ” with customized pipe and different connectors.
How to check with your automatic watering system?
Why it’s watering weakly or water overdosing? Please check:
1. Avoid Siphon.Water source /water bucket /water surface level should not be placed higher than the pump.2. Please adjust inlet and outlet tube and water level to be at the approximately same horizontal level.3.Please check battery. The pump waters weakly when battery’s electricity volume is low.
Why it’s not working? Please check if these were well set:
1.Inlet tube and outlet tube were installed correctly. Please check user manual guide.2.No clogging inside the tube.3. Power source is workable and battery power is strong.4.Timer was set correctly.
【Travel/Working Good Helper】: Solve your daily work, take care of plants when traveling question.Automatic watering device can help you water on time every day, make the plants grow healthier and longer lasting, and make your life easier
【Timing Watering Device】Combine the pump and watering timer in an automatic watering system to pump water from the container, saving 70% water compared to traditional spray and plant irrigation dripper.Help you to take care of plants during the working day, holiday
【Two Types of Power】Run the indoor plant irrigation system, with 4 AA batteries or USB connection power. When the battery and USB power supply exist at the same time, the system will give priority to USB charger power .Simultaneous use can prevent power outages.(Power Not Included).
【 Program Memory】:Once programmed, the settings are stored in internal memory automatically. Custom programming and settings will remain in memory even if power is removed. There will be no need to reprogram the timer every time batteries are changed.
【Package Includes】: Device, 32ft Hose, Irrigation Drippers(15 pcs), Three-way joint(14 pcs), Four-way joint(2 pcs),Filter(1 pcs),Usb wire and Manual book. Your satisfaction is our top priority,