(as of Apr 15,2021 23:11:08 UTC – Details)
NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE. 360° pattern and with 1/4” barb or spike. The adjustable Stream Drip Emitters are designed to produce a very low flow to gentle stream pattern with an adjustable flow of up to 18.1 GPH and a diameter of up to 2.3’ at 25 PSI. The adjustable stream drip emitters have a rotating cap that allows for simultaneous control of the flow and the wetted area. As your plants grow, they require more water to flourish and the flow and the area covered can be increased to support the plants’ growth. Used for an individual plant, group of plants, planter boxes, small to large pots, ground covers, shrubs and trees, these adjustable drip emitters offer a convenient way to water areas where conventional sprinkler systems are not practical.
SIZE: For use with any 1/4″ Inch tubing size – 4 to 7 mm (Can also be punched into 1/2 drip tubing).
PREVENT LEAKS & BLOWOUTS: These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature NOTE: THE MAXIMUM RECOMMENDED AMOUNT OF FITTINGS PER ZONE AT 25PSI IS QTY.22 IF YOU EXCEED THIS AMOUNT YOU MAY HAVE INSUFFICIENT WATER PRESSURE.
ECO FRIENDLY: Provide water directly where you need it without any overspray!
EASY TO INSTALL: Install emitters directly into the 1/2 main line or branch off with 1/4 inch tubing and connect fittings to the ends!