Bed Bug Treatment

Before you begin with you bed bug treatment it’s necessary to do the appropriate preparations for control to be the best. This applies to whether you intend to do it yourself or hire an expert.

All furniture and appliances will need to be pulled away from the walls and baseboards. You need to remove everything from bookshelves and desks; these items need to be treated. Everything in tightly sealed bags won’t need to be treated.

Everything which can be laundered ought to be laundered, you’ll want to do this before the treatment, and then put them in plastic bags to keep them bed bug free. This includes clothes, bedding, stuffed animals, and curtains and so on.

The items should be securely tied inside plastic bags, and then emptied into the machines. You then need to dispose of the empty bag. The heat is what’s going to kill the bed bugs, not the water, so therefore the higher the heat the better. Things should be dried with medium heat to high heat for 40 minutes or more.

If the wash cycle is not possible, then the usage of the dryer is going to be better than nothing.

You should inform your dry cleaners the items which you’re dropping off to dry may be infested; they may or may not accept them.

Vacuuming is a really important part of the control method of bed bugs, it won’t eliminate your problem but can greatly reduce the population of bed bugs, and if a crack and crevice attachment is available it needs to be used on all furniture pieces and anywhere else there’s a possibility of the bed bug hiding.

Baseboards should also be vacuumed using the crevice tool, do not wipe them off with a broom to hand duster. Vacuum bags should then immediately be removed and placed in doubled plastic bags and placed into strong plastic bag for disposal.

Deciding how you handle your mattress, box spring and pillows can be a tricky choice. Some people choose to dispose of the entire unit, but this can be costly for someone and not even an option. Getting rid of the infested bedding won’t solve any bed bug problem. But if you do opt for replacing everything possibly because it was old and was going to be replaced anyway then it ought to be done after treatment has occurred.

Placing your bedding material inside vinyl, polyvinyl or polyethylene encasement is a always a fantastic idea that includes the box spring not only the mattress. Bedbugs are extremely lazy and like to hide near the victim and thus they are generally found on seams of mattresses, or within the structure of box springs. This will permanently seals any remaining insects in the encasement. An encasement is a fantastic idea until you have eliminated the infestation and in case of an extra outbreak the bedding won’t be as difficult a job.

Bedbug infestations are not successfully managed by one remedy alone. And the area ought to be re-inspected in about 2 weeks and retreated if eveidence of bed bugs are recognized.

Here are a few easy to follow steps that needs to be done prior to bed bug treatments. These few steps can help you kill bed bugs effectively. You will need to Remove mattress and box spring from the bed frame and set the upright against a wall for review and possible treatment. You may wish to maintain the encasement. Linens are placed over these encasements, keep them placed in sealed plastic bags throughout treatment.

Disassemble bed frames for review and treatment. Eliminate the tacking, fabric cover, from the foundations of box spring, sofas, and chairs. You will want to Remove curtains and drapes and have them laundered in hot water and a hot dryer if an option or dry cleaned. Replace clean, sealed plastic bag until reinstalling them after treatment has been completed and you’re sure that all the bed bugs are killed. All fabrics must be laundered in HOT water and HOT dryer cycle where possible. Dry clean those items that cannot be laundered. Once everything was laundered replace in plastic bags.

Remove all items from walls mirrors, pictures, other items and leave from the room for review Unhook all cables from electronic and electric devices
Move all furniture away from walls Remove all electric plates on walls electrical outlets, phone jacks, light switch covers, cable sockets. You will need to remove and assess the panels for the heating and air conditioning units and wall vents. Eliminate the baseboards if possible and expose the flooring underneath.

My hope is that this information for preparation for bed bug control treatment will be beneficial for anyone needed to kill bed bugs. Whether you plan on treating your house yourself or hiring a pest control operator this guideline should provide you plenty of information on what to expect.

There are a lot of sites which offers a full line of professional pest management services including glue traps, mouse traps, animal traps for squirrels, moles etc. for all your Do It yourself Pest Control needs. You can now use the same products the professional pest management technicians use at a fraction of the price tag.

Leave a Reply

Your email address will not be published. Required fields are marked *